8603工作面回采巷道支护方案优化及数值模拟

针对深部软岩巷道围岩变形量大,传统支护结构失效的问题,以煤峪口矿回采巷道为研究背景,综合应用数值模拟和工程实践对原支护方案下巷道破坏特征进行分析,提出采用中空注浆锚索进行补强支护,并采用FLAC3D分析了两种支护方案下巷道围岩的收敛量以及应力分布情况,得出了优化支护方案能够有效控制巷道围岩破碎程度,并通过工程实践得到验证。     

Thermal performance and energy saving investigation in a modified baseboard radiator and compare it with conventional heating systems—Experimental and CFD approach

In the present work, thermal performance of a new modified baseboard radiator is investigated experimentally based on the European Standard EN-442. Temperature distribution and thermal comfort conditions of the floor heating system and panel radiator is compared with the present system numerically. To validation of the simulation results, a comparison has been made between the simulation and the experimental obtained results. Comparison shows that there is a good agreement between them. The heat output rate of the new system increased about 46.06% compared with conventional baseboard radiant model and also the baseboard heating system is capable of providing better thermal comfort conditions than two other systems. Energy consumption in three systems is investigated experimentally by smart temperature control mechanism. Results show that energy consumption in the baseboard radiant is 83.03% and 55.96% lower than floor heating system and panel radiator, respectively.     

Large eddy simulation of a 660 MW utility boiler under variable load conditions

Large eddy simulation (LES) has become a promising tool for pulverized coal combustion with the development of computational fluid dynamics (CFD) technologies in recent years. LES can better capture the unsteady features and turbulent structures of coal jet flame than Reynolds averaged Navier Stokes (RANS). The coal-fired power plants in China are now required to be operated in a wide load range and quickly respond to the electric grid. The boiler performance of variable loads should be evaluated in terms of flow, heat transfer, and combustion processes. In this paper, LES was applied to simulate a 660 MW ultra-supercritical boiler under BMCR (boiler maximum continue rate), 75%THA-100, and 50%THA-100 conditions. The predicted gas velocities agree well with the thermal calculation and the temperature error is less than 130 K. The simulation results show that the operation load has significant effects on the boiler performance. It is also proved that LES can provide guidance for the design and operation of advanced coal-fired boilers.     

Pore-scale study of effects of different Pt loading reduction schemes on reactive transport processes in catalyst layers of proton exchange membrane fuel cells

Reducing the Platinum (Pt) loading while maintaining the performance is highly desired for promoting the commercial use of proton exchange membrane fuel cells (PEMFCs). Different methods have been adopted to fabricate catalyst layers (CLs) with low Pt loading, including utilizing lower Pt/C catalysts (MA), mixing high Pt/C catalysts with bare carbon black particles (MB), and reducing CL thickness while maintaining high Pt/C ratio (MC). In this study, self-developed pore-scale model is adopted to investigate the performance of the three Pt reduction methods. It is found that MA shows the best performance while MB shows the worst. Then, effects of Pt dispersion are further explored. The results show that denser Pt sites will result in higher local oxygen flux and thus higher local transport resistance. Therefore, MA method, which shows the better Pt dispersion, leads to improved performance. Third, CLs with quasi-realistic structures are investigated. Higher tortuosity resulting from the random pores produces higher bulk resistance along the thickness direction, while MA still exhibits the best performance. Finally, improved CL structures are investigated by designing perforated CL structures. It is found that adding perforations can significantly reduce the bulk transport resistance and can improve the CL performance. It is demonstrated that CL structure plays important roles on performance, and there are still huge potentials to further improve CL performance by increasing Pt dispersion and optimizing CL structures.     

映秀湾电站水轮机转轮沙水流动数值模拟

为了研究映秀湾水电站水轮机内部沙水流动特性,对水轮机进行沙水流动数值模拟,分析水轮机转轮部分沙水流动情况。研究结果表明,转轮内叶片进水边及出水边靠下环处是泥沙分布的主要区域。研究结果对水轮机泥沙磨损的研究具有指导意义。     

Numerical Simulation of Sterilization Processes for Shear‐Thinning Food in Taylor‐Couette Flow Systems

The performance of the Taylor‐Couette flow apparatus as a heat sterilizer is numerically investigated. The destruction of Clostridium botulinum and thiamine (vitamin B1) was selected as model reaction. When Taylor vortices were formed in the annular space, the heat transfer significantly enhanced as compared to the case without vortex flow. As a result, the equivalent lethality calculated from the temperature field increased, which is regarded as a quantum leap. Conversely, the improvement of heat transfer induced destruction of thiamine. These results suggest that there is a trade‐off relationship between the enhancement of heat transfer and the avoidance of thermal destruction of nutritional components. In conclusion, the Taylor‐Couette flow sterilizer has the potential for process intensification in heat sterilization processes.     

高能电子成像研究进展

本文通过蒙特卡罗程序EGS模拟研究了电子束与靶的相互作用，对成像束流光学进行了设计，并对束流匹配对空间分辨的影响、超快分束技术和产生横向均匀束技术等进行了模拟研究。实验验证了高能电子成像能达到μm量级的空间分辨，并可实现厚度、密度分辨及明-暗场成像等特点。同时给出了后续实验及研究计划，希望进一步提高高能电子成像性能并拓宽其应用领域。     

智能温度测量系统设计

以AT89C52单片机作为微控制器，设计了一个智能温度测量系统。该系统通过DS18B20温度传感器实现环境温度的采集和A/D转换，模数转化后的电信号送入AT89C52单片机，再通过单片机将其送入LCD1602数码管进行显示。通过实验结果可以看出，相比较传统的温度采集方法，该系统能够快速准确地检测温度，并且检测精度可以达到0.1 ；同时，该系统具有过温点设定值调节及温度上下限蜂鸣提示的优点。     

Modeling occupant behavior of the manual control of windows in residential buildings

Window opening and closing is the most preferred behavior for occupants to control their indoor environment in homes. This study aims to identify driving forces for window opening and closing behavior in the home. The additional field survey was carried out for the cooling period after following the previous study. The state of windows and environmental variables for outdoor and indoor were continuously monitored in 23 sample homes over one year. The monitored data provide evidence that there is a statistically significant relationship between window opening behavior and outdoor temperature. The behavior of the occupant's manual control of windows can be described by seasonal effects, occupancy, and time of day. Indoor stimuli, such as such as temperature, humidity, and CO₂, can better account for the window opening behavior than can outdoor stimuli. There are clear differences in driving variables between window opening and closing behavior. The closing behavior is better described when the outdoor and indoor variables are combined. Finally, multivariate logistic regression models were developed to predict typical patterns of window opening and closing as a function of indoor and outdoor variables.